Brands
EX 1.2
EX 1.2 Ultra Compact Active Subwoofer System
- - Incredibly compact single 12" active subwoofer system
- - As with all KV2 Audio products, the EX 1.2 boasts output that belies it's compact, low profile cabinet size
- - Featuring KV2 Audio's current enhancing switch mode amplifier technology
- - Delivers 500watts of tight, fast, controlled bass response at very high output levels from an incredibly small cabinet footprint
- - This low profile design makes it a fantastic choice for discreet installations as it can be installed both horizontally or vertically
Features
- - Professional, Baltic birch construction with wear resistant polymer coating.
- - 124dB sustained output, 127dB peak.
- - 500W high efficiency, current-enhancing, switching, low frequency amplifier.
- - Complete on board subwoofer management including equalization, crossover filters, amplifier overdrive protection, output level and phase controls.
- - Excellent reproduction of bass frequencies with high transient content at high output levels.
- - Stereo or Mono inputs with through signal outputs and 120Hz High Pass outputs.
- - 12” high output, low frequency drivers with 3” (75mm) inside/outside, epoxy baked, high temperature, voice coil assembly and neodymium magnetic structures.
- - Two recessed side handles for simplified handling and carrying.
- - M20 top hat for pole mounting applications.
- - LED indicators for signal present, limiter, thermal condition and power ON status.
Applications
-
* High quality fixed installations.
- * Portable PA Systems for AV speech and multimedia playback.
- * Small to medium sized live music applications.
- * Mobile DJ.
- * Stand alone subwoofer to supplement an existing passive or active system.
System Acoustic Perfomance |
|
| Max SPL Long-term | 124dB |
| Max SPL Peak | 127dB |
| -3dB Response | 38Hz - 120Hz |
| -10dB Response | 32Hz - 120Hz |
| Crossover Point | 120Hz |
Low Frequency Section |
|
| Acoustic Design | Front Loaded, Bass Reflex |
| Woofer Size / Voice Coil Diameter / Design | 12" / 3" / Inside outside |
| Magnet Type | Neodymium |
| Diaphragm Material | Epoxy Reinforced Cellulose |
Low Frequency Amplifier Specification |
|
| Type | High efficiency, Current-enhancing switch mode |
| Rated Continuous Power | 500W |
| Distortion | <0.05% |
Signal Input |
|
| Input Sensitivity | 1.0V RMS |
| Input Impedance | 20 kΩ |
Power |
|
| Power Connector | Neutrik PowerCon® |
| Operating Voltage Range | 100-120V@60Hz 205-240V@50Hz |
| Recommended Amperage | 6A 115V | 3A 230V | 3A 250V |
Cabinet |
|
| Cabinet Material | Baltic birch |
| Handles | 2 |
| Pole Mount | 35mm |
| Color | "Orange peeled" Matt Black or any RAL |
