Brands
EX 2.2
EX 2.2 - Active Bass Module
- - Double 12”, compact, active subwoofer system
- - On-board electronics include a stereo crossover with High Pass outputs and full overdrive protection
- - Featuring KV2 Audio’s High efficiency, Current-enhancing switch mode amplifier
- - Precision manufactured woofer designs and a high efficiency, twin chamber acoustic design
- - Delivers tight, fast, controlled bass response at very high output levels from a small cabinet footprint
Features
- - Professional, Baltic birch construction with wear resistant polymer coating.
- - 130dB sustained output, 133dB peak.
- - 1000W high efficiency, current-enhancing, switching, low frequency amplifier.
- - Complete on board subwoofer management including equalization, crossover filters, amplifier overdrive protection, output level and phase controls.
- - Excellent reproduction of bass frequencies with high transient content at high output levels.
- - Stereo or Mono inputs with through signal outputs and 125Hz High Pass outputs.
- - Two 12” high output, low frequency drivers with 3” (75mm) inside/outside,
epoxy baked, high temperature, voice coil assembly and neodymium magnetic structures. - - Two recessed side handles for simplified handling and carrying.
- - Acetyl copolymer, high impact, low friction feet are located on two sides allowing
lock-in and easy cabinet movement. - - Two internal corner braces with four M10 suspension points.
- - M20 top hat for pole mounting applications.
- - LED indicators for signal present, limiter, thermal condition and power ON status.
Applications
- * High quality fixed installations.
- * Portable PA Systems for AV speech and multimedia playback.
- * Small to medium sized live music applications.
- * Mobile DJ.
- * Stand alone subwoofer to supplement an existing passive or active system.
System Acoustic Perfomance |
|
| Max SPL Long-term | 130dB |
| Max SPL Peak | 133dB |
| -3dB Response | 45Hz ÷ 125Hz |
| -10dB Response | 40Hz ÷ 125Hz |
| Crossover Point | 125Hz |
Low Frequency Section |
|
| Acoustic Design | Twin Asymmetrical loading |
| Number of Drivers | 2 |
| Woofer Size / Voice Coil Diameter / Design | 12" / 3" / Inside outside |
| Diaphragm Material | Epoxy Reinforced Cellulose |
| Magnet Type | Neodymium |
Low Frequency Amplifier Specification |
|
| Type | High efficiency, Current-enhancing switch mode |
| Rated Continuous Power | 1000W |
| Distortion | <0.05% |
| Operating Bandwidth | 40Hz ÷ 125Hz |
Signal Input |
|
| Input Channels | 2 |
| Input Sensitivity | 1.0V RMS |
| Input Impedance | 20kΩ (balanced) |
Signal Output |
|
| Output channels | Mid/High, Through |
Features |
|
| Level Control | -6 - +6dB |
| Phase | 0° / 180° |
| RMS Limiter | YES |
Power |
|
| Power Connector | Neutrik PowerCon® |
| Operating Voltage | 115V / 230V / 250V |
| Operating Voltage Range | 100÷120V@60Hz | 205÷240V@50Hz | |
| Recommended Amperage | 10A 115V | 5A 230V | 5A 250V |
| Cooling | Passive |
Cabinet |
|
| Cabinet Material | Baltic birch |
| Handles | 2 |
| Pole Mount | M20 |
| Color | "Orange peeled" Matt Black or any RAL |
