Brands
EX 2.5 MkII
EX 2.5 MkII - Low Frequency Solution
- - Double 15” subwoofer and the ‘active’ brother of the ES2.6 passive bass module
- - Provides depth and power that belies its size.
- - Uses the same low frequency amplifier found inside the EPAK2500/2500R and features in-built stereo crossovers, High Pass outputs, and full overdrive protection
- - It also features a new Speaker Level output on a EP4 connector to drive one additional passive ES 2.6 subwoofer from its own internal amplifier. (Not to be used with a passive ES 2.5)
Features
- - Professional, Baltic birch construction with wear resistant polymer coating.
- - 134dB sustained output 137dB peak.
- - 1600W high efficiency, current enhancing, switching low frequency amplifier.
- - Speaker level EP4 output to drive one additional passive ES 2.6 subwoofer.
- - Complete on board subwoofer management including equalization, crossover
- filters, amplifier overdrive protection, output level and phase controls.
- - Excellent reproduction of sub bass frequencies with high transient content at high output levels.
- - Stereo or Mono inputs with through signal outputs and 125Hz High Pass outputs.
- - Two 15” high output, low frequency drivers with 4” (100mm) inside/outside,
- epoxy baked, high temperature, voice coil assembly and neodymium magnetic structures.
- - Six propietry side handles for simplified handling and carrying.
- - Heavy duty front grille to work with the innovative new EX 2.5 magnetic cart.
- - Acetyl copolymer high impact, low friction feet are located on two sides allowing vertical
- or horizontal set up and easy cabinet movement. Feet lock in to the new ES subwoofers.
- - Six internal corner braces with twelve M10 suspension points. M20 top hat for pole mounting applications.
- - LED indicators for signal present, limiter, thermal condition and power ON status.
Applications
- * High quality fixed installations.
- * Large Portable PA Systems for A.V speech and multimedia playback.
- * Medium to large -sized live music applications.
- * Mobile DJ.
- * Stand alone subwoofer to supplement an existing passive or active system.
System Acoustic Perfomance |
|
| Max SPL Long-term | 131dB |
| Max SPL Peak | 134dB |
| -3dB Response | 38Hz ÷ 125Hz |
| -10dB Response | 34Hz ÷ 125Hz |
| Impedance | 8Ω |
| Crossover Point | 125Hz |
Output Channels |
|
| Number of Channels | 1 |
| Minimum load impedance per channel | 8Ω |
Low Frequency Section |
|
| Acoustic Design | Twin Asymmetrical loading |
| Woofer Size / Voice Coil Diameter / Design | 2x 15” / 4” / Inside outside |
| Magnet Type | Neodymium |
| Diaphragm Material | Epoxy Reinforced Cellulose |
Low Frequency Amplifier Specification |
|
| Type | High efficiency, Low frequency, Current-enhancing |
| Rated Continuous Power | 1600W |
| Distortion | <0.05% |
| Operating Bandwidth | 34Hz - 125Hz |
Signal Input |
|
| Input Channels | 2 |
| Input Sensitivity | 1.0V RMS |
| Input Impedance | 20kΩ (balanced) |
Signal Output |
|
| Output channels | Mid/High, Through |
Speaker Input |
|
| Speaker Input | - / EP4 |
Features |
|
| Level Control | -6 ÷ +6dB |
| Phase | 0° / 180° |
| RMS Limiter | YES |
| Indicators | Power ON/Thermal, Limiter |
Power |
|
| Power Connector | Neutrik PowerCon® |
| Output Power Connector | Neutrik PowerCon® |
| Operating Voltage | 115V / 230V / 250V |
| Operating Voltage Range | 100÷120V@60Hz 205÷240V@50H225 |
| Recommended Amperage | 16A 115V | 8A 230V | 8A 250V |
Cabinet |
|
| Cabinet Material | Baltic birch |
| Handles | 4 |
| Pole Mount | M20 |
| Color | "Orange peeled" Matt Black or any RAL |
