Brands
EX 1.8
EX 1.8 - High Output Active Subwoofer
- - High output single 18" subwoofer
- - Housing a revolutionary VHD technology neodymium woofer
- - Features an impressive 1000watts of power courtesy of KV2 Audio's High efficiency, Current-enhancing switch mode amplifier
- - Provides a very firm foundation on which to build a powerful EX system
Features
- - Professional, Baltic birch construction with wear resistant polymer coating.
- - 131dB sustained output, 134dB peak.
- - 1000W high efficiency, current-enhancing, switching, low frequency amplifier.
- - Complete on board subwoofer management including equalization, crossover filters, amplifier overdrive protection, output level and phase controls.
- - Excellent reproduction of bass frequencies with high transient content at high output levels.
- - Stereo or Mono inputs with through signal outputs and 125Hz High Pass outputs.
- - 18” high output, low frequency drivers with 4” (100mm) inside/outside,
epoxy baked, high temperature, voice coil assembly and neodymium magnetic structures. - - Two recessed side handles for simplified handling and carrying.
- - Acetyl copolymer, high impact, low friction feet are located on two sides allowing
lock-in and easy cabinet movement. - - Two internal corner braces with four M10 suspension points.
- - M20 top hat for pole mounting applications.
- - LED indicators for signal present, limiter, thermal condition and power ON status.
Applications
- * High quality fixed installations.
- * Large Portable PA Systems for A.V speech and multimedia playback.
- * Medium to large -sized live music applications.
- * Mobile DJ.
- * Stand alone subwoofer to supplement an existing passive or active system.
System Acoustic Perfomance |
|
| Max SPL Long-term | 131dB |
| Max SPL Peak | 134dB |
| -3dB Response | 30Hz - 125Hz |
| -10dB Response | 27Hz - 125Hz |
| Crossover Point | 125Hz |
Low Frequency Section |
|
| Acoustic Design | Twin Asymmetrical loading |
| Woofer Size / Voice Coil Diameter / Design | 18" / 4" / Inside outside |
| Diaphragm Material | Epoxy Reinforced Cellulose |
| Magnet Type | Neodymium |
Low Frequency Amplifier Specification |
|
| Type | High efficiency, Low frequency, Current-enhancing |
| Rated Continuous Power | 1000W |
| Distortion | <0.05% |
Signal Input |
|
| Input Channels | 2 |
| Input Sensitivity | 1.0V RMS |
| Input Impedance | 20 kΩ |
Signal Output |
|
| Output channels | Mid/High, Through |
Features |
|
| Level Control | -6 - +6dB |
| Phase | 0° / 180° |
| RMS Limiter | YES |
| Indicators | Power ON/Thermal, Limiter |
Power |
|
| Power Connector | Neutrik PowerCon® |
| Operating Voltage Range | 100-120V@60Hz | 205-240V@50Hz | |
| Recommended Amperage | 10A 115V | 5A 230V | 5A 250V |
Cabinet |
|
| Cabinet Material | Baltic birch |
| Handles | 2 |
| Pole Mount | M20 |
| Color | "Orange peeled" Matt Black or any RAL |
