Brands
VHD 1.0
VHD 1.0 - Mid High/Down-fill Enclosure
- - Mid High / down-fill enclosure features a single 12”low mid and single 8” mid range speaker taken from the VHD2.0, featuring the same compression driver as the VHD2.0 but on a wide angle 110° horizontal by 40° vertical horn
- - Alternatively as a stand alone box up to three VHD1.0’s can be powered from a single VHD2000 amplifier
- - Like the VHD2.0, VHD1.0 is available in left and right versions for downfill applications
- - Designed to be powered as a slave from the VHD2.0 cabinet or directly from the VHD2000 amplifier, all equalization, set up and level are preset providing a plug and play solution for large scale touring and high quality installations
Features
- - Professional Baltic birch construction with wear-resistant polymer coating.
- - Cut away down angle for correct positioning when flown underneath VHD 2.0 cabinet.
- - Four pieces of fly-track (two per side).
- - Very High Definition audio reproduction.
- - 134dB sustained output, 137dB peak.
- - Controlled wide dispersion 110° x 40° Mid/High horn with a flat response to 180°.
- - Revolutionary 3” (76mm) Nitride Titanium diaphragm compression driver with complex geometry phase plug and neodymium magnetic structure for higher output, exceptionally low distortion and extended frequency response.
- - 8” Trans-Coil midrange driver, with a 3” (76mm) voice coil and neodymium
magnet for increased control and output with reduced distortion and weight.
Horn loaded 12” mid-bass driver with 3”(76mm) inside/outside, epoxy baked, high temperature voice coil assembly and neodymium magnetic structure. - - Three way active requirement - 1000W from the VHD 2000 providing 600W for the 12” Low Mid, 300W for the 8” Midrange and 100W for the High Frequency.
- - Proprietary side handle design (four) for simplified handling and carrying.
- - High impact low friction feet, allowing lock- in to other VHD cabinets and easy cabinet movement.
- - Front locking aluminium VHD wheel boards with wraparound hardwood bumpers.
- - Weather proofing option and special paint finishes available on request.
Applications
- * Large and medium-sized live music touring applications.
- * Very high quality fixed installations.
- * Professional portable PA systems for large format AV speech and multimedia playback.
- * Very High Definition dance systems providing the ultimate reproduction for clubs and events.
System Acoustic Perfomance |
|
| Max SPL Long-term | 134dB |
| Max SPL Peak | 137dB |
| -3dB Response | 100Hz ÷ 22kHz |
| -10dB Response | 85Hz ÷ 30kHz |
| Full Range mode -3dB Response | 65Hz ÷ 22kHz |
| Crossover Point | 100Hz, 450Hz, 2.2kHz |
High Frequency Section |
|
| Acoustic Design | Horn Loaded |
| High Horn Coverage Horizontal / Vertical | 110° x 40° |
| High Frequency Amplifier Requirement | 100W (VHD2000 amp.) |
| Throat Exit Diameter / Diaphragm Size | 1.4” / 3.0” |
| Diaphragm Material | Nitride Titanium |
| Magnet Type | Neodymium |
Mid Range Section |
|
| Acoustic Design | Horn Loaded |
| Mid Horn Coverage Horizontal / Vertical | 110° x 40° |
| Midrange Amplifier Requirement | 300W (VHD2000 amp.) |
| Woofer Size / Voice Coil Diameter / Design | 8" / 3.0" / Trans Coil |
| Diaphragm Material | Epoxy Reinforced Cellulose |
| Magnet Type | Neodymium |
Mid-Bass Section |
|
| Acoustic Design | Horn Loaded |
| Mid-bass Amplifier Requirement | 600W (VHD2000 amp.) |
| Woofer Size / Voice Coil Diameter / Design | 2x 12" / 3" / Inside Outside |
| Diaphragm Material | Epoxy Reinforced Cellulose |
| Magnet Type | Neodymium |
Speaker Input |
|
| Speaker Input | EP6 / EP6 |
Cabinet |
|
| Cabinet Material | Baltic birch |
| Handles | 6 |
| Color | "Orange peeled" Matt Black or any RAL |
