Brands
SAC 2
SAC 2 - Super Analog Controller - 2 channel
- - 2 input X 4 ouput Super Analog audio controller
- - Designed for optimised performance with KV2 Audio's ESD loudspeakers, as well as other manufacturers passive or active loudspeakers
- - Each channel features a switchable crossover with adjustable HPF / LPF and two independent notch filters, for left and right channels, to quickly and effectively reduce room resonances and feedback issues.
Features
Incorporating KV2 Audio's legendary VHD Line Drivers on each output, the SAC2 boasts the Clarity, Resolution and Very High Definition expected from KV2 Audio's Super Live Audio series of products. This combined with a four-band master EQ section, selectable High pass filter, switchable polarity, Subwoofer EQ enhancement circuit and a variable speed limiter make the SAC2 one of the finest sounding loudspeaker controllers on the market today.
Applications
- * 2-way stereo crossover for use with KV2 Audio's ESD loudspeakers or other manufacturers products.
- * Room EQ for use with KV2 Audio's loudspeakers or other manufacturers products.
- * High quality monitoring system EQ.
- * Very High Quality Limiter feature for applications where a noise restriction applies.
System Acoustic Perfomance |
|
| -1dB Response | 20Hz ÷ 40kHz |
| Dynamic Range | >115dB |
| Channel Crosstalk | >60dB |
| Total Harmonic Distortion | <0.005% |
Output Channels |
|
| Max. Output Voltage | 14V / 7V (50Ω) RMS |
| Max. Output Current | 450mA |
Signal Input |
|
| Input Channels | 2 |
| Input Impedance | 20kΩ (balanced) |
| Line input | XLR |
Signal Output |
|
| Output channels | 4 |
| Output Impedance | 50Ω |
Features |
|
| Level Control | 15 / +10dB |
| System setup | Crossover / Bypass |
| Gain | -10 / +10dB |
| Phase | 0° / 180° |
| Crossover | 70 / 120Hz, Butterworth 12dB/octave |
| High Pass Filter | 20 / 40Hz |
| Equalization | 4-band equalizer |
| Notch Filter | 2 per channel |
| Loudness bass enhancement | +6dB @ 60Hz |
| Volume Limiter | Fast/Slow / -15 + 10dB |
| Indicators | 4x LED bar graphs |
Power |
|
| Power Connector | IEC 320 |
| Operating Voltage | 115V / 230V |
| Operating Voltage Range | 90÷130V@60Hz | 180÷260V@50Hz |
