Brands
SD 8
SD 8 - Stage Driver, 8 Channel
- - Eight-channel stage preamp
- - Designed with individual line drivers that maintain audio signal integrity over long cable lengths (As cable lengths increase, the length of the cable creates a high capacitance load that most microphones have difficulty in driving)
- - Eight independent mic inputs, gain control adjustment, -20 dB pad and 48V phantom power, signal level bar LED display
- - Each input has two outputs allowing signal routing to two separate locations such as front of house and monitoring consoles
Features
- - 2U 19” rack eight channel stage preamp with line drivers.
- - Eight individual microphone or line inputs with gain controls and pads.
- - Phantom power available on each channel.
- - Sixteen individual 50 ohm outputs (two per input).
Applications
- * Improving quality for live music touring applications.
- * Improving quality for Installed sound applications.
- * Correct driving of difficult lines over long distance.
System Acoustic Perfomance |
|
-1dB Response | 6Hz - 500kHz |
Dynamic Range | >120dB |
Total Harmonic Distortion | <0.0005% |
Output Channels |
|
Max. Output Voltage | 14V / 7V (50Ω) RMS |
Max. Output Current | 450mA |
Signal Input |
|
Input Channels | 8x |
Input Impedance | 20kΩ |
Mic input | 0 - +30dB Gain, pad -20dB |
Signal Output |
|
Output channels | 8x2 |
Output Impedance | 50Ω |
Features |
|
Indicators | Signal bar, Phantom |
Power |
|
Power Connector | IEC 320 |
Operating Voltage Range | 100-120V @ 60Hz | 230-250V @ 50Hz |
Protection | T315mA (115V), T160mA (240V) |