Brands
SL3000 Amplifier
SL3000 Amplifier - Rack mounted
Preliminary
- SL3000 is designed as part of KV2 Audio's SL Series
- Optimised for use with the SL4.15 loudspeaker system
- Tri-amplified stereo electronic control pack and features Super Analog components throughout
- Offers a true musical solution to the music enjoyment on a grand scale
Features
The SL3000 Amplier is a three-way, active control and amplication system specically designed for the KV2 Audio SL Series modular loudspeaker systems.
It houses all signal processing and amplication as well as providing control for two dierent external subwoofer cabinet congurations to run further subwoofer cabinets if needed. External subwoofer is powered by the external subwoofer amplier.
The amplier compliment inside the SL3000 Amplier is as follows:
- High Frequency - 100-watt, Class AB, push pull, low intermodulation design
- Mid Frequency - 200-watt, Class AB, push pull, low intermodulation design
- Bass - 1000-watt, high-eciency, current-enhancing switch mode technology with Linear Active Filter
Applications
- High quality installations
- High quality live music performance
- Very high quality fixed installations
Output Channels |
|
Number of Channels | 2 (stereo) |
Total Output Power | 2x 1300W |
High Frequency Amplifier Specification |
|
Type | Class AB - Push Pull - Low IM Design, |
Transformer balanced output | |
Rated Continuous Power | 100W |
Distortion | <0.02% |
Operating Bandwidth | 400Hz ÷ 2,5kHz |
Mid Frequency Amplifier Specification |
|
Type | Class AB - Push Pull - Low IM Design, |
Transformer balanced output | |
Rated Continuous Power | 200W |
Distortion | <0.02% |
Operating Bandwidth | 400Hz ÷ 2,5kHz |
Low Frequency Amplifier Specification |
|
Type | High efficiency, Current-enhancing switch mode |
Rated Continuous Power | 1000W |
Distortion | <0.02% |
Operating Bandwidth | 35Hz ÷ 400Hz |
Signal Input |
|
Input Sensitivity | 1V RMS |
Input Impedance | 20kΩ (balanced) |
Speaker Output |
|
Speaker Output | 2x EP6 |
Power |
|
Power Connector | 2x Neutrik PowerCon® |
Operating Voltage | 115V / 230V / 250V |
Operating Voltage Range | 100÷120V@60Hz | 205÷240V@50Hz | |
225÷260V@50Hz | |
Recommended Amperage | 2x10A 115V | 2x5A 230V | 2x5A 250V |